Robotech Automation · UAE
Construction Robotics
On-site mobile painting robots for interior walls and ceilings—3.3 m and 6.2 m platforms, each available for spray paint or stucco and paint—configured around the building, the finish, and site access.
Tell us what process you want to automateOverview
Construction Robotics
Robotech specifies construction robotics for interior spray finishing where coverage, consistency, and safer application matter more than a factory cell. Two mobile platforms cover typical needs: 3.3 m for compact access and standard room heights, and 6.2 m for taller walls and ceilings. Each can run spray paint only, or stucco and paint on the same platform. Systems are selected around access, material, and the finish required—then supported with installation, training, and service from the UAE team.
Discuss your applicationPainting robots
Interior paint spraying.
Interior painting robots
Two platforms. Two spray modes.
For UAE fit-out and interior works, Robotech specifies two mobile painting robots—3.3 m for typical room heights and tighter access, and 6.2 m for taller walls and ceilings. Each platform can be set up for spray paint or for stucco and paint, then supported with installation and operator training from the UAE team.
Where the project needs it, room scanning and mapping can run before coating so spray paths follow the actual space. Battery duty and site settings are confirmed during application review—not published as fixed productivity claims.
Platform
3.3 m spraying platform
Compact layout for corridors, elevators, and occupied floors where spray height up to 3.3 m is enough. Choose spray paint only, or stucco and paint on the same platform.
Platform
6.2 m spraying platform
High-reach layout for taller interior walls and ceilings where coverage to 6.2 m is slow or unsafe by hand alone. The same two modes apply: spray paint, or stucco and paint.
Mode
Spray paint
Controlled wall and ceiling coating for latex or paint stages once the surface is ready. Path, distance, and process settings follow the material and the room.
Mode
Spray stucco and paint
Wall preparation with stucco, then paint, on the same mobile platform by changing material and process settings. Changeover and suitability are confirmed during application review.
Capabilities
What this covers.
- 3.3 m compact spraying platform
- 6.2 m high-reach spraying platform
- Spray paint mode
- Spray stucco and paint mode
- Walls and ceilings for fit-out and interior works
- Compact navigation for corridors and occupied floors
- Operator-focused controls and on-site training
Suitable for
Who this is for.
- Interior finishing contractors and developers
- Fit-out teams needing consistent wall and ceiling spray work
- Renovation projects with limited corridor access
- Site teams reducing manual spray exposure at height
Applications
Where it is used.
- 3.3 m compact interior paint spraying
- 6.2 m high-reach wall and ceiling spraying
- Spray paint on walls and ceilings
- Spray stucco and paint on one platform
- New buildings
- Warehouses and villas
FAQ
Common questions.
What does construction robotics cover?
Construction robotics covers on-site interior finishing, such as paint and putty spraying. These systems are configured around the building layout and the required finish specifications. Meanwhile, the off-site production of structures and panels remains under the Construction sector.
Which painting robot platforms are offered?
Two platforms: a 3.3 m compact layout for typical room heights and tighter access, and a 6.2 m high-reach layout for taller walls and ceilings. Selection follows room height, doorway clearance, and the coating process.
Can the space be scanned before spraying?
Yes. Where the project needs it, room scanning and mapping can run before coating so spray paths follow the actual interior. Scope is agreed during consultation.
Do operators need programming skills?
No. After training, site teams run the system from a visual control interface. Robotech includes operator training with installation so the crew can work the process without writing robot programs.
How is coating kept consistent?
Spray distance, path, and process settings are controlled and reviewed against the material and the room. Exact parameters follow the coating, the substrate, and the site conditions agreed during consultation.
Can this work in narrow or renovation spaces?
Often yes, after a site review of doorways, corridors, and floor conditions. The 3.3 m compact platform is selected when access is tight; not every layout is suitable without that check.
Can one platform handle stucco and paint?
Yes. Both the 3.3 m and 6.2 m platforms can run spray paint only, or stucco and paint, by changing material and process settings. Changeover and suitability are confirmed during application review.